China Fastener Info->IFI Yellow Page

Square and Hex Bolts and Screws

--Square Bolts
ASME B18.2.1 1996

--Hex Bolts
ASME B18.2.1 1996

--Hex Cap Screws
ASME B18.2.1 1996

--Heavy Hex Screws
ASME B18.2.1 1996

--Heavy Hex Bolts
ASME B18.2.1 1996

Large Size Heavy Hex Screws

--Large Size Heavy Hex Screws
IFI-149 2000

Square and Hex Bolts and Screws

--Square and Hex Lag Screws
ASME B18.2.1 1996

Hex Flange Screws

--Hex Flange Screws
IFI-111 2002

Flange 12-Point Screws

--Flange 12-Point Screws
IFI-115 2002

Round Head Bolts

--Round Head Bolts
ASME B18.5 1990(R 1998)

--Round Head Square Neck Bolts
ASME B18.5 1990(R 1998)

--Round Head Short Square Neck Bolts
ASME B18.5 1990(R 1998)

--Round Head Ribbed Neck Bolts
ASME B18.5 1990(R 1998)

--Round Head Fin Neck Bolts
ASME B18.5 1990(R 1998)

--Step Bolts
ASME B18.5 1990(R 1998)

--Contersunk Bolts and Slotted countersunk Bolts
ASME B18.5 1990(R 1998)

--114 Degree Countersunk Square Neck Bolts
ASME B18.5 1990(R 1998)

--Flat Countersunk Head Elevator Bolts
ASME B18.5 1990(R 1998)

--T-Head Bolts
ASME B18.5 1990(R 1998)

Plow Bolts

--No.3 Head Plow Bolts(Round,Countersunk,Square Neck)
ASME B18.9 1996

--No.7 Head Plow Bolts(Round,Countersunk,Reverse Key)
ASME B18.9 1996

--No.4 Repair Head Plow Blots(Square Head,Countersunk)
ASME B18.9 1996

--No.6 Repair Head Plow Bolts(Square Head,Heavy Key)
ASME B18.9 1996

--No.4 Regular Head Plow Blots(Square Head,Countersunk)
ASME B18.9 1996

--No.6 Regular Head Plow Blots(Square Head,Heavy Key)
ASME B18.9 1996

Track Bolts

--Oval Neck Track Bolts
ANSI/ASME B18.10 1982(R 2000)

--Elliptic Neck Track Bolts
ANSI/ASME B18.10 1982(R 2000)

Forged Eyebolts

--Plain Pattern(Straight Shank) Eyebolts
ASME B18.15 1985(R 1995)

--Shoulder Pattern Eyebolts
ASME B18.15 1985(R 1995)

Stdus and Bent Bolts

--Double End Studs Bolts
IFI-136 2002

--Interference-Thread Double End Studs Bolts
IFI-136 2002

--Bent Bolts
IFI-136 2002

Slotted Head Cap Screws

--Slotted Flat Countersunk Head Cap Screws
ASME B18.6.2 1998

--Slotted Round Head Cap Screws
ASME B18.6.2 1998

--Slotted Fillister Head Cap Screws
ASME B18.6.2 1998

Threaded Projection Weld Studs

--Type U3 Projection Weld Studs
IFI-148 2002

--Type T3 Projection Weld Studs
IFI-148 2002

--Type TD Projection Weld Studs
IFI-148 2002

--Type UR Projection Weld Studs
IFI-148 2002

--Heavy Duty Type US3 Projection Weld Studs
IFI-148 2002

--Type UC4 Projection Weld Studs
IFI-148 2002

--Type TC4 Projection Weld Studs
IFI-148 2002

--Type TUS3 Projection Weld Studs
IFI-148 2002

Square and Hex Nuts

--Square Nuts
ASME/ANSI B18.2.2 1987(R 1999)

--Hex Flat Nuts and Hex Flat Jam Nuts
ASME/ANSI B18.2.2 1987(R 1999)

--Hex Nuts and Hex Jam Nuts
ASME/ANSI B18.2.2 1987(R 1999)

--Hex Slotted Nuts
ASME/ANSI B18.2.2 1987(R 1999)

--Hex Thick Nuts
ASME/ANSI B18.2.2 1987(R 1999)

--Hex Thick Slotted Nuts
ASME/ANSI B18.2.2 1987(R 1999)

--Heavy Square Nuts
ASME/ANSI B18.2.2 1987(R 1999)

--Heavy Hex Flat Nuts and Heavy Hex Flat Jam Nuts
ASME/ANSI B18.2.2 1987(R 1999)

--Heavy Hex Nuts and Heavy Hex Jam Nuts
ASME/ANSI B18.2.2 1987(R 1999)

--Heavy Hex Slotted Nuts
ASME/ANSI B18.2.2 1987(R 1999)

Hex Flange Nuts and Large Hex Flange Nuts

--Hex Flange Nuts
IFI-145 2002

Hex Coupling Nuts

--Hex Coupling Nuts
IFI-128 2000

Nuts for Track Bolts

--Track Bolts Nuts
ANSI/ASME B18.10 1982(R 2000)

Square and Hex Machine Screw Nuts

--Square and Hex Machine Screw Nuts
ANSI/ASME B18.6.3 1998

Wing Nuts

--Type A Wing Nuts
ASME B18.6.x DRAFT STANDARD 2002

--Type B Wing Nuts
ASME B18.6.x DRAFT STANDARD 2002

--Type C Wing Nuts
ASME B18.6.x DRAFT STANDARD 2002

--Type D Wing Nuts
ASME B18.6.x DRAFT STANDARD 2002

Structural Bolting

--Heavy Hex Structural Bolts
ASME DRAFT Revision B18.2.6 2003

--Hardened Stell Circular and Circular Clipped Washer
ASME DRAFT Revision B18.2.6 2003

--Hardened Beveled Washers with Slope or Taper in Thickness 1:6
ASME DRAFT Revision B18.2.6 2003

--Washer-Type Direct Tension Indicators
ASME DRAFT Revision B18.2.6 2003

--Heavy Hex Structral Bolts
ASME DRAFT Revision B18.2.6 2003

--Heavy Hex Nuts for Use with Structural Bolts
ASME DRAFT Revision B18.2.6 2003

--Washers for High Strength Structural Bolts
ASME DRAFT Revision B18.2.6 2003

--Structural Bolts,Steel.Heat Treated,120/105 KSI Minimum Tensile Strength
ASTM A325 2002

--Compressible Washer-Type Direct Tension Indicators
ASME DRAFT Revision B18.2.6 2003

--Twist Off Type Tension Control Structural Bolts Heavy Hex Head and Round Head Configurations
ASME DRAFT Revision B18.2.6 2003

Locking Fasteners

--Prevaliling-Torque Type Regular Hex and Light Hex Series Nuts
IFI-100/107 2002

--Prevailing-Torque Type Hex Flange Nuts
IFI-100/107 2002

Socket Screws

--Hexagon and Spline Socket Head Cap Screws
ASME B18.3 2002

--Underhead Fillets for Socket Head Cap Screws
ASME B18.3 2002

--Drilled Hexagon Socket Head Cap Screws
ASME B18.3 2002

--Low Head Hexagon Socket Cap Screws
ASME B18.3 2002

--Hexagon and Spline Socket Flat Countersunk Head Cap Screws
ASME B18.3 2002

--Hexagon and Spline Socket Button Head Cap Screws
ASME B18.3 2002

--Hexagon Socket Head Shoulder Screws
ASME B18.3 2002

--Hexagon and Spline Socket Set Screws
ASME B18.3 2002

--Hexagon Socket
ASME B18.3 2002

--Spline Sockets
ASME B18.3 2002

--Hexagon Keys and Bits
ASME B18.3 2002

--Spline Keys and Bits
ASME B18.3 2002

--Gages for Hexagon Sockets
ASME B18.3 2002

--Gages for Spline Sockets
ASME B18.3 2002

--Drill and Counterbore Size for Socket Head Cap Screws
ASME B18.3 2002

Tapping Screws

--Thread Rolling Tapping Screws
SAE J81 1997

--Tapping Screws and Metallic Drive Screws
Abstract of ASME B18.6.4 1998

--Threads and Points for Type AB Thread Forming Tapping Screws
Abstract of ASME B18.6.4 1998

--Threads and Points for Types B and BP Thread Forming Tapping Screws
Abstract of ASME B18.6.4 1998

--Threads and Points for Types BF and BT Thread Cutting Tapping Screws
Abstract of ASME B18.6.4 1998

--Threads and Points for Types D,F,G, and T Thread Cutting Tapping Screws
Abstract of ASME B18.6.4 1998

--Slotted Flat Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Cross Recessed Flat Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Slotted Undercut Flat Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Cross Recessed Undercut Flat Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Cross Recessed Flat Countersunk Rtim Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Slotted Oval Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Cross Recessed Oval Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Slotted Undercut Oval Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Cross Recessed Undercut Oval Countersunk Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Heads of Oval Countersunk Trim Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Type I Cross Recessed Oval Countersunk Trim Head Tapping Screws:Long Screw with Shoulder and Short Screws
Abstract of ASME B18.6.4 1998

--Type IA Cross Recessed Oval Countersunk Trim Head Tapping Screws:Long Screws with Shoulder and Short Screws
Abstract of ASME B18.6.4 1998

--Type II Cross Recessed Oval Countersunk Trim Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Slotted Pan Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Cross Recessed Pan Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Slotted Fillister Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Cross Recessed Fillister Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Regular and Large Hex Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Hex Washer Head Tapping Screws
Abstract of ASME B18.6.4 1998

--Type I Gage Points
Abstract of ASME B18.6.4 1998

--Type IA Gage Points
Abstract of ASME B18.6.4 1998

--Type II Gage Points
Abstract of ASME B18.6.4 1998

--Type C Thread Forming Tapping Screws
Abstract of ASME B18.6.4 1998

--Flat and Oval Countersunk Trim Head Screws
Abstract of ASME B18.6.4 1998

--Types A,AB and BP Tapping Screws
Abstract of ASME B18.6.4 1998

--Round Head Type U Metallic Drive Screws
Abstract of ASME B18.6.4 1998

--Self-Drilling Tapping Screws
SAE J78 1998

Machine Screws

--Slotted Flat Countersunk Head Nachine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Square Recessed Type III Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted 100 Degree Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed 100 Degree Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Close Tolerance 100 Degree Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Close Tolerance 100 Degree Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Oval Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Reccessed Oval Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Square Recessed Type III Oval Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Undercut Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Undercut Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Squeare Recessed Type III Undercut Flat Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Undercut Oval Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Undercut Oval Cpuntersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Square Recessed Type III Undercut Oval Countersunk Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Flat Countersunk Trim Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Flat Countersunk Trim Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Oval Countersunk Trim Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Pan Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Pan Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Square Recessed Type III Pan Head Machine Screws(Optionally Slotted)
Draft Revision ASME B18.6.3 2002

--Slotted-Type I and Type IA Cross Recessed Pan Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Fillister Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Fillister Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Square Recessed Type III Fillister Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Drilled Fillister Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Truss Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Truss Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Square and Square Slotted Type III Recessed Truss Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Combination Slotted and Cross Recessed Type I Truss Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Binding Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Binding Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Square Recessed Type III Binding Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Plain(Unslotted) and Slotted Regular and Large Hex Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Type I Cross Recessed Indented and Nonindented Regular and Large Hex Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Plain(Unslotted) and Slotted Hex Washer Head Macxhine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Type I Indented Hex Washer Head Machine Screws(Slot Optional)
Draft Revision ASME B18.6.3 2002

--Cross Recessed Type I Round Washer Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Slotted Round Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed Round Head Machine Screws
Draft Revision ASME B18.6.3 2002

--Cross Recessed With Slot for Types I and IA and Type III Round Head Machine Screws
Draft Revision ASME B18.6.3 2002

Square Head and Slotted Headless Set Screws

--Square Head Set Screws
ASME B18.6.2 1998

--Slotted Headless Set Screws
ASME B18.6.2 1998

--Socket Head Cap Screw
ASME B18.6.2 1998

Thumb Screws and Wing Screws

--Type A,Regular Thumb Screws
IFI-156 2002

--Type A,Heavy Thumb Screws
IFI-156 2002

--Type B,Regular Thumb Screws
IFI-156 2002

--Type B,Heavy Thumb Screws
IFI-156 2002

--Type A,Wing Screws
IFI-156 2002

--Type B,Style 1 Wing Screws
IFI-156 2002

--Type B,Style 2 Wing Screws
IFI-156 2002

--Type C,Style 1 Wing Screws
IFI-156 2002

--Type C,Style 2 Wing Screws
IFI-156 2002

--Type D,Wing Screws
IFI-156 2002

--Alternate Styles of Points for Thumb and Wing Screws
IFI-156 2002

Wood Screws

--Threads and Body Diameters for Wood Screws
ASME B18.6.1 1981(R 1997)

--Slotted Flat Countersunk Head Wood Screws
ASME B18.6.1 1981(R 1997)

--Cross Recessed Flat Countersunk Head Wood Screws
ASME B18.6.1 1981(R 1997)

--Slotted Oval Countersunk Head Wood Screws
ASME B18.6.1 1981(R 1997)

--Cross Recessed Oval Countersunk Head Wood Screws
ASME B18.6.1 1981(R 1997)

--Slotted Pan Head Wood Screws
ASME B18.6.1 1981(R 1997)

--Cross Recessed Pan Head Wood Screws
ASME B18.6.1 1981(R 1997)

Miniature Screws

--Slotted Fillister Head Miniature Screws
ASME B18.11 1961(R 2000)

--Slotted Pan Head Miniature Screws
ASME B18.11 1961(R 2000)

--Slotted 100 Degree Flat Head Miniature Screws
ASME B18.11 1961(R 2000)

--Slotted Binding Head Miniature Screws
ASME B18.11 1961(R 2000)

Large Rivet 1/2 In. Nominal Diameter and Larger

--Button Head Rivets
ASME B18.1.2 1972(R 2001)

--High Button Head(Acorn) Rivets
ASME B18.1.2 1972(R 2001)

--Cone Head Rivets
ASME B18.1.2 1972(R 2001)

--Flat Countersunk Head Rivets
ASME B18.1.2 1972(R 2001)

--Oval Countersunk Head Rivets
ASME B18.1.2 1972(R 2001)

--Pan Head Rivets
ASME B18.1.2 1972(R 2001)

--Swell-Neck Rivets
ASME B18.1.2 1972(R 2001)

Small Solid Rivets 7/16 In. Nominal Diameter and Smaller

--Flat Head Rivest and Flat Countersunk Head Rivets
ASME B18.1.1 1972(R 2001)

--Button Head Rivets and Pan Head Rivets
ASME B18.1.1 1972(R 2001)

--Truss Head Rivets and Thinners Rivets
ASME B18.1.1 1972(R 2001)

--Cooper Rivets
ASME B18.1.1 1972(R 2001)

--Belt Rivets And 60-Degrees Flat Countersunk Head Rivets
ASME B18.1.1 1972(R 2001)

--Standard Header Points for Small Solid Rivets
ASME B18.1.1 1972(R 2001)

Tubular Rivets,Full Tubular Rivets,Split Rivets and Rivet Caps

--Oval Head Semi-Tubular Rivets
ASME B18.7 1972(R 2001)

--Truss Head Semi-Tubular Rivets
ASME B18.7 1972(R 2001)

--150 Degree Flat Countersunk Head Semi-Tubular Rivets
ASME B18.7 1972(R 2001)

--120 Degree Flat Countersunk Head Semi-Tubular Rivets
ASME B18.7 1972(R 2001)

--Full Tubular Rivets
ASME B18.7 1972(R 2001)

--Oval Head and Flat Countersunk Head Split Rivets
ASME B18.7 1972(R 2001)

--Rivet Caps
ASME B18.7 1972(R 2001)

Break Mandrel Blind Rivets

--Break Mandrel Blind Rivets
IFI-114 2003

Pull Through Mandrel Blind Rivets

--Regular and Large Dome Head Pull Through Mandrel Blind Rivets
IFI-117 2003

--100 Degree Countersunk Head Pull Through Mandrel Blind Rivets
IFI-117 2003

Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets

--Regualr and Large Dome Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
IFI-119 2003

--100 Degree and 120 Degree Countersunk Head Style Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets
IFI-119 2003

Drive Pin Blind Rivets

--Dome Head Drive Pin Blind Rivets
IFI-123 2003

--Countersunk Head Drive Pin Blind Rivets
IFI-123 2003

Break Mandrel Closed End Blind Rivets

--Dome Head Style Break Mandrel Closed End Blind Rivets
IFI-126 2003

--120 Degree Countersunk Head Style Break Mandrel Closed End blind Rivets
IFI-126 2003

Structural Splitting Self-Plugging Pull Mandrel Blind Rivets

--Regular and Large Head Structural Splitting Self-Plugging Pull Mandrel Blind Rivets
IFI-130 2003

--100 Degree Countersunk Head Structural Splitting Self-Plugging Pull Manbdrel Blind Rivets
IFI-130 2003

Muti-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets

--Regular and Large Muti-Grip Dome Head Flush Break Pull Mandrel Self-Plugging Blind Rivets
IFI-134 2003

--100 Degree Countersunk Head Muti-Grip Flush Break Pull Mandrel Self-Plugging Blind Rivets
IFI-134 2003

Plain Washer

--Plain Washers
ASME B18.22.1 1965(R 1998)

Lock Washers

--Regular Helical Spring Lock Washers
ASME B18.21.1 1999

--Heavy Helical Spring Lock Washers
ASME B18.21.1 1999

--Extra-Duty Helical Spring Lock Washers
ASME B18.21.1 1999

--Hight-Collar Helical Spring Lock Washers
ASME B18.21.1 1999

--Intelnal Tooth Lock Washers
ASME B18.21.1 1999

--External Tooth Lock Washers
ASME B18.21.1 1999

--Internal-External Tooth Lock Washers
ASME B18.21.1 1999

Hardened Stell Washers

--Hardened Steel Washers
Abstract Of ASTM F436 1993(R 2000)

Clevis Pins and Cotter Pins

--Clevis Pins
ASME B18.8.1 1994 (R 2000)

--Cotter Pins
ASME B18.8.1 1994 (R 2000)

Taper Pins,Dowl Pins,Straight Pin,Grooved Pins,and Spring Pins

--Taper Pins
ASME B18.8.2 2000

--Dowel Pins
ASME B18.8.2 2000

--Straight Pins
ASME B18.8.2 2000

--Grooved Pins
ASME B18.8.2 2000

--Round Head Grooved Drive Studs
ASME B18.8.2 2000

--Grooved T-Head Cotter Pins
ASME B18.8.2 2000

--Slotted Type Spring Pins
ASME B18.8.2 2000

--Coiled-Type Spring Pins
ASME B18.8.2 2000